MAP KIT LAYER / PATCH 1.4
Control Resonant map kit sensor locations
Map kit sensors are grouped by zone so you can filter to one area. Follow each three-step calibration note, then return to the local Pylon to reveal the map.
SENSOR / 1.4
Downtown sensor 1
Landmark: Rooftop north of the Pylon below the “Velocity You Can Trust” sign
Before you go: Reach
Missable: No — map kit remains open
- Pull the Downtown Pylon lever.
- Reach the rooftop below the sign and calibrate the dish.
- Return to the Pylon after all three sensors turn green.
Open on the map →SENSOR / 1.4
Downtown sensor 2
Landmark: Northeast of the Pylon by the rusted water tower and green table
Before you go: Reach
Missable: No — map kit remains open
- Follow the red broadcast marker northeast.
- Calibrate the dish beside the stacked spotlights.
- Leave the final Pylon activation until all three are green.
Open on the map →SENSOR / 1.4
Downtown sensor 3
Landmark: Fenced basketball court southeast of the Pylon beside the first fast-travel door
Before you go: Reach
Missable: No — map kit remains open
- Drop from the Pylon toward the fenced court.
- Calibrate the dish beside the fast-travel door.
- Return to the central Pylon to reveal the map.
Open on the map →SENSOR / 1.4
Central sensor 1
Landmark: Blue portable-office containers north of the orange Pylon office
Before you go: Reach
Missable: No — map kit remains open
- Find the orange portable-office Pylon.
- Hop north to the blue containers and calibrate the dish.
- Keep the Field Office as the return landmark.
Open on the map →SENSOR / 1.4
Central sensor 2
Landmark: Orange container stack northeast by the Verconn building entrance
Before you go: Reach
Missable: No — map kit remains open
- Leave the Pylon toward the Verconn entrance.
- Climb the orange container stack and calibrate the dish.
- Return to the Pylon after sensor 3.
Open on the map →SENSOR / 1.4
Central sensor 3
Landmark: Lone blue container east of the Pylon beside yellow balloons
Before you go: Reach
Missable: No — map kit remains open
- Use the yellow balloons to keep the Pylon behind you.
- Calibrate the dish on the lone blue container.
- Pull the Pylon lever again to reveal Central.
Open on the map →SENSOR / 1.4
Evacuation sensor 1
Landmark: Roof across Main Street north of the Pylon and fast-travel door
Before you go: Reach
Missable: No — map kit remains open
- Anchor on the rooftop Pylon beside the door.
- Cross north and watch for the slow-blinking red light.
- Calibrate, then continue to the two southern markers.
Open on the map →SENSOR / 1.4
Evacuation sensor 2
Landmark: Short hop east of the Pylon and fast-travel door
Before you go: Reach
Missable: No — map kit remains open
- Use the Pylon roof as the starting point.
- Hop east to the nearby dish and calibrate it.
- Return to the Pylon only after sensor 3 is green.
Open on the map →SENSOR / 1.4
Evacuation sensor 3
Landmark: Rooftop southwest across the southern street near the “Velocity You Can Trust” sign
Before you go: Reach
Missable: No — map kit remains open
- Follow the southern street from the Pylon.
- Use the sign as the landmark for the rooftop dish.
- Return to the rooftop Pylon and activate the map.
Open on the map →SENSOR / 1.4
West Incursion sensor 1
Landmark: Southwest corner of the House of Mirrors square near the Patterned Area sign
Before you go: Reach / Shift
Missable: No — map kit remains open
- Reach the House of Mirrors town square.
- Clear the guarded square and calibrate the southwest dish.
- Use the Pylon across from the theater as the return point.
Open on the map →SENSOR / 1.4
West Incursion sensor 2
Landmark: Eastern street corner near the House of Mirrors, visible from sensor 1
Before you go: Reach / Shift
Missable: No — map kit remains open
- Cross the square toward the theater’s eastern corner.
- Calibrate the visible dish from sensor 1.
- Stay on the street edge while moving to sensor 3.
Open on the map →SENSOR / 1.4
West Incursion sensor 3
Landmark: Northeast street that turns vertical near Atlantis and The Badger
Before you go: Reach / Shift
Missable: No — map kit remains open
- Follow the vertical street northeast of the Pylon.
- Calibrate the dish between the shop landmarks.
- Return to the square and activate the Pylon.
Open on the map →SENSOR / 1.4
The Park sensor 1
Landmark: Rooftop northwest of the central Pylon, northeast from Park Valley door
Before you go: Reach
Missable: No — map kit remains open
- Start at the Park Valley fast-travel door.
- Head northeast to the rooftop dish.
- Return through the Mold-heavy center after sensor 2 and 3.
Open on the map →SENSOR / 1.4
The Park sensor 2
Landmark: Mold-filled ditch north of the Pylon between a small building and highrise
Before you go: Reach / Mold clearance
Missable: No — map kit remains open
- Drop from the Pylon area into the ditch.
- Clear the Mold around the dish before calibrating.
- Climb back toward the central rooftop.
Open on the map →SENSOR / 1.4
The Park sensor 3
Landmark: Building southwest of the Pylon above graffiti and a neon Bar sign
Before you go: Reach
Missable: No — map kit remains open
- Drop from the Pylon roof toward the graffiti.
- Use the neon Bar sign as the final landmark.
- Return to the Mold-covered Pylon and activate it.
Open on the map →SENSOR / 1.4
Underpass sensor 1
Landmark: Column north of the Pylon, visible from the white-lit spire
Before you go: Reach / story access
Missable: No — map kit remains open
- Activate the fast-travel door at the white-lit spire.
- Look southeast for the three columns around the Pylon.
- Calibrate the north column, then cross to the east and south columns.
Open on the map →SENSOR / 1.4
Underpass sensor 2
Landmark: Column east of the Pylon in the research area
Before you go: Reach / story access
Missable: No — map kit remains open
- Clear the Riveter and nearby heavy units first.
- Reach the east column and calibrate the dish.
- Drop to the stepped platform after sensor 3.
Open on the map →SENSOR / 1.4
Underpass sensor 3
Landmark: Column south of the Pylon
Before you go: Reach / story access
Missable: No — map kit remains open
- Follow the ledges around the Pylon.
- Calibrate the southern column.
- Return to the stepped central platform and activate the Pylon.
Open on the map →SENSOR / 1.4
Unknown sensor 1
Landmark: Roof near the red-brick building with “Yo” graffiti
Before you go: Reach / late story
Missable: No — map kit remains open
- Open the supply balloon route and pull the platform with Reach.
- Jump to the red-brick building and keep right.
- Calibrate the roof dish before crossing back toward the Pylon.
Open on the map →SENSOR / 1.4
Unknown sensor 2
Landmark: Hanging roof above the Pylon near the white-brick building and red Bus Only sign
Before you go: Reach / late story
Missable: No — map kit remains open
- Use a nearby rooftop to swap up and down with Reach.
- Use the Bus Only sign to orient the hanging dish.
- Calibrate it before the final floodlight marker.
Open on the map →SENSOR / 1.4
Unknown sensor 3
Landmark: Pylon-level platform near intense white floodlights and a deflated yellow balloon
Before you go: Reach / late story
Missable: No — map kit remains open
- Stay level with the Pylon and follow the floodlights.
- Calibrate the dish beside the deflated balloon.
- Return to the high floating roof and activate the final Pylon.
Open on the map →